TB 10-8400-252-23
d. Coveralls, Explosive Handler's, Specification MIL-C-14610.
The tolerance for all measurements shall be 1/2 inch.
Finished Measurements (In Inches)
X-Small
Small
Medium
Large
X-Large
1
1/2 chest
20 1/2
22 1/2
24 1/2
26 1/2
28 1/2
1/2 waist2
15 1/2
18 1/2
21 1/2
24 1/2
27 1/2
Sleeve inseam3
22 1/2
22 1/2
22 1/2
22 1/2
22 1/2
Leg inseam4
32
32
32
32
32
1
With coverall buttoned, measure across front at base of armhole from folded edge to folded edge.
2
With coverall buttoned, measure across waist from folded edge to folded edge.
3
Measure inseam from base of armhole to bottom of sleeve.
4
Measure inseam from crotch seam to bottom of leg.
e. Coveralls, Rocket Fuel Handler's, Full Protection, Specification MIL-C-43063.
Finished Measurements (In Inches)
Small
Medium
Large
X-Large
XX-Large
Tolerance
1
1/2 breast
21 3/4
23 1/2
25 1/4
27
28 3/4
3/4
Sleeve inseam2
22 1/4
23 1/2
24 3/4
26
27 1/4
3/4
Trouser inseam3
28 1/2
28 1/2
28 1/2
28 1/2
28 1/2
1/2
1
With the slide fastener closed, and front of coveralls smoothed fiat, measure across front from a point 1/2 inch below armhole seam from side seam to
side seam.
2
Measure the sleeve inseam from the base of armhole along the inseam of sleeve to bottom of cuff.
3
Measure from the base of crotch along the inside of leg to the bottom of leg.
f. Coverall, Rocket Fuel Handler's, Impermeable, Limited Protection, Specification MIL-C-43082.
Finished Measurements (In Inches)
Medium
Large
Tolerance
1
Chest
41
44
3/4
2
Sleeve, inse3 m
a
23 1/2
25
3/4
Leg, inseam
22
24
1/2
1
With coveralls open and fiat, measure across from edge to edge 1/2 inch below armhole seam.
2
Measure the sleeve inseam from the base of armhole along the inseam of sleeve to bottom of sleeve closure ring.
3
Measure from the base of crotch along the inside edge of leg to the bottom.
g. Coveralls, Radioactive Contaminants, Protective, Specification MIL-C-822243.
Finished Measurements (In Inches)
Small-Medium
Large-X-Large
Tolerance
Chest
(A)
52
56
1
Seat
(B)
53
57
1
Leg inseam
(C)
31
33
1/2
Sleeve inseam
(D)
21 + 4" (wristlet)
21 + 40 (wristlet)
1/2
Back length
(E)
641/2
70
1/2
Note. Chest and seat measurements shall be taken prior to joining the back elastic webbing, with the coverall placed smooth and fiat
(A) Chest-Twice the measurement taken across front at base of armholes from folded edge to folded edge.
(B) Seat-Twice the measurement taken across front six inches above the crotch seam from folded edge to folded edge.
(C) Leg inseam-Measurement shall be taken from junction of seams (crotch) along inseam to bottom of hemmed coverall legs.
(D) Sleeve inseam-Measurement shall be taken from the base of the armhole along inseam to bottom of sleeve.
(E) Back length-Total back length from bottom of leg hem to top of hem at neck opening-4 inches from center seam.
h. Coveralls, Safety, Industrial, Specification, MILC-43339.
Finished Measurements (In Inches)
Size
X-Small
Small
Medium
Large
X-Large
Tolerance
1/2 Chest'
20 1/2
22 1/2
24 1/2
26 1/2
28 1/2
1/2
1/2 Waist'
17
19
21
25
25
1/2
Sleeve inseam'
23
23
23
23
23
1/2
Leg inseam'
32
32
32
32
32
1/2
1
The coverall shall be buttoned smooth and flat and measured across the front from base of armhole to base of armhole.
2
The coverall shall be buttoned smooth and flat and measured across waist from side seam to side seam.
3
The sleeve inseam shall be measured from the base of armhole along inseam to bottom of sleeve hem.
4
The leg inseam shall be measured from crotch seam along inseam to bottom of leg hem.
10