TB 9-2300-280-30
Figure 3. Location of anchors, reflectors, and hooks on right side
of body on M36, M36A1, M36A2, M36 A2C, M36C
(6) Arc weld 28 anchors, using fillet welds. Welds are to be approximately 1/8 inch thick, 1 inch long
(7) Position one lashing hook on each of seven anchors on left and on right side panels of body as
(8) Using hook as template mark and drill two 1/4-inch diameter holes through anchor and body
(9) Install 14 hooks removed in step 1, using 28 rivets. If rivets are not available, use screws NSN
(10) Position two relfectors on each body side panel, 1/4-inch from anchor and with centerline of
5