Figure 11. Location of anchors on M51, M51A1, M51A2, and M817 truck
(3) Clean, prime and paint in accordance with TM 43-0139.
d. Procedure for M51, M51A1, M51A2, M817 Trucks.
(1) Using template provided in kit, scribe location of eight anchors on left side, eight on right side,
two on front paneI and two on tailgate, as shown in figure 11.
(2) Cut holes using a hole saw, matching the template. Trim rough edges and arc weld 20 anchors
e. Procedure for M54, M54A1, M54A1C, M54A2, M54A2C, M813, M813A1 Trucks.
(1) Remove and retain five paulin lashing hooks, one reflector, two screws and two locknuts from
each side panel of cargo body. Discard 20 rivets.