TEST OR INSPECTION
Figure 4-12. Water pump and motor assembly, disassembly and reassembly.
Clean all parts in a well-ventilated area. Avoid inhalation of solvent fumes and prolonged exposure
of skin to cleaning advent. Wash exposed skin thoroughly. Dry cleaning solvent (Fed. Spec. P-
D-680) used to clean parts is potentially dangerous to personnel and property. Do not use near open
flame or excessive heat. Flash point of solvent is 100 to 138F. (38 to 59C.).
c. Clean the impeller using cleaning solvent, Fed. Spec. P-D-680 and dry thoroughly.
d. Replace impeller if damaged.
to figure 4-12 and reassemble the water pump and motor assembly
to figure 4-11 and install the water pump and motor assembly.