Section IX. HOSE GUARD, DRAIN BIN, STORAGE CYLINDER BOX,
T O O L BOX, MAIN GUARD, JACKSHAFT GUARD,
HOSES AND CABLES
4-19. Hose Guard
Figure 4-24. Hose guard, removal and installation.
c. Inspection and Replacement.
(1) Inspect the hose guard for damage.
Clean all parts in a well-ventilated area.
(2) Replace a damaged hose guard.
Avoid inhalation of solvent fumes and
d. Installation. Position the hose guard (3, fig.
prolonged exposure of skin to cleaning
4-24) onto the trailer and secure with lockwashers
sovent. Wash exposed skin thoroughly.
(2) and screws (l).
Dry cleaning solvent (Fed. Spec. P-D-680)
4-20. Drain Bin
used to clean parts is potentially dangerous
to personnel and property. Do not use near
open flame or excessive heat. Flash point
and chain hook (6) securing the drain bin (7) to the
of advent is 100 to 138F. (38 to 59C.).
Clean the hose guard, with cleaning solvent,
Fed. Spec. P-D-680, and dry thoroughly.