4-23. Main Drive Guard
(1) Inspect the tool box for damage.
(2) Replace a damaged toolbox.
d. Installation. Position the tool box (4, fig.
4-27) onto the trailer and secure with bolts (3),
main drive guard (4) to the washer-extractor.
lockwashers (2) and nuts (1).
Figure 4-28. Main drive guard, removal and installation.
(1) Inspect the main drive guard for damage.
(2) Weld any cracks or breaks, straighten any
dents and/or replace damaged guard.
Clean all parts in a well-ventilated area.
d. Installation. Position the main drive guard
Avoid inhalation of solvent fumes and
(4, fig. 4-28) onto the washer-extractor and secure
prolonged exposure of akin to cleaning
advent. Wash exposed skin thoroughly,
Dry cleaning solvent (Fed. Spec. P-D-680)
wed to clean parts is potentially dangerous
4-24. Washer Extractor Hydro-Sheave Drive
to personnel and property. Do not we near
Guard (Edro Model EP120-LTU)
open flame or excessive heat. Flash point
of solvent is 100 to 138F. (38 to 59C.).
the washer extractor main drive guard from the
Clean the main drive guard with cleaning
solvent, Fed. Spec. P-D-680, and dry thoroughly.
c. Inspection and Repair.