1. Elbow connector
2. Elbow connector
7. Air Compressor
Figure 4-60. Air compressor, removal and installation.
b. Cleaning, Inspection and Repair.
to personnel and property. Do not use near
open flame or excessive heat. Flash point
Clean all parts in a well-ventilated area.
of solvent is 100 to 138F. (38 to 59C.).
Avoid inhalation of solvent fumes and
(1) Thoroughly clean the air compressor
prolonged exposure of skin to cleaning
assembly with cleaning solvent, Fed. Spec.
solvent. Wash exposed skin thoroughly.
P-D-680, and dry thoroughly.
Dry cleaning solvent (Fed. Spec. P-D-680)
used to clean parts is potentially dangerous
dents, cracks, nicks and other damage.