Figure 4-81. Fuel pump, removal and installation.
to clean parts is potentially dangerous to
personnel and property. Do not use near
open flame or excessive heat. Flash point of
Clean all parts in a well-ventilated area.
solvent is 100 to 138F. (38 to 59C.).
Avoid inhalation of solvent fumes and
Clean the pump with cleaning solvent, Fed.
prolonged exposure of skin to cleaning
Spec. P-D-680, and dry thoroughly.
solvent. Wash exposed skin thoroughly. Dry
c. Inspection and Repair.
cleaning solvent (Fed. Spec. P-D-680) used