Clean all parts in a well-ventilated
area. Avoid inhalation of solvent
fumes and prolonged exposure of
skin to cleaning solvent. Wash
cleaning solvent (Fed. Spec. P-D-
680) used to clean parts is potentially
property. Do not use near open
flame or excessive heat. Flash point
of solvent is 100 to 138° F. (38 to 59° C).
Clean the drain pan with cleaning solvent. Fed.
Spec. P-D-680, and dry thoroughly.
Inspection and Repair.
Inspect the drain pan for cracks,
breaks, dents and other damage.
straighten, dents, or replace the drain pan.
Install the drain pan (4. fig. 7-25) and
secure with lockwashers (3) and capscrews (2).
Install the coupling (1).
U. S. GOVERNMENT PRINTING OFFICE / 1978 / 765-117 / 88