TM 10-3510-208-34
NOTE
The Simpson 160 is only available in
new shop sets as a substitute for the
TS-352B/U or AN/URM-105.
b.
Using the Ohms Scale. The ohms scale is
used to make test for continuity, shorts and resistance.
(1)
"Zeroing" the Meter (Fig. 2-2). The
multimeter must be set up and "zeroed" before making
these tests. See figure 2-2 and follow the instructions
that match your multimeter.
AN/URM-105
TS 022252
Figure 2-2. "Zeroing" the Multimeters (Sheet 1 of 3).
2-5