Table 3-2. Troubleshooting (Continued)
TEST OR INSPECTION
13. WASHER FILLS WITH WRONG TEMPERATURE OF WATER. (Cont)
Check for proper thermostat setting on water heater.
If setting is incorrect, refer to malfunction 2, step 2.
If correct temperature cannot be obtained, notify your supervisor.
14. WASHER FAILS TO TUMBLE.
Check positions of switches on controller.
Position the switches to effect proper tumbling action.
If washer still fails to tumble, proceed to next step.
Check to ensure washer door is closed.
If the door is not closed, close the door and secure.
If door is closed and secure, proceed to next step.
Check to see if controller reset button (22, FIG. 2-1) is tripped.
If controller reset button is tripped, push reset button.
If reset button is not tripped, proceed to next step.
Remove rings, bracelets, wristwatches, and neck chains before working around or
on the laundry unit. Jewelry can catch on equipment and cause injury, or may
short across an electrical circuit and cause severe burns or electrical shock.
Ensure circuit breakers are in the OFF position.
Check drive mechanism for missing or damaged belt. Report missing or damaged belts
to your supervisor.