Table 3-2. Troubleshooting (Continued)
TEST OR INSPECTION
14. WASHER FAILS TO TUMBLE.
Check for blown fuses on side of controller. Replace suspect fuses with a known good
If problem still persists, notify your supervisor.
15. WASHER FAILS TO DRAIN.
Check controller switches for proper position.
Position switches as needed.
If switches are in proper position, proceed to next step.
Check drain hose for kinks and/or clogged condition.
If hose is kinked or clogged, disconnect hose and remove foreign material. Connect
hose and straighten kinks.
If drain hose is not kinked or clogged, proceed to next step.
Check drain hose air valves for loose couplings and damage. If air hose valves are loose
or damaged, notify your supervisor.