2-10. PREPARATION FOR MOVEMENT. (CONT)
Check that bleeder valve hose is installed on bleeder valve before valve is
opened. Serious injury to personnel can occur from hot water.
Disconnect and drain suction hose (3) from water pump (2). Connect long garden hose to water
release valve (4). Open water release valve (4) and bleeder valve (5) on water heater (6) and drain
water from water heater. Disconnect and store long garden hose in hose basket assemblies.
Disconnect strainer (7) from suction hose (3). Store hose and strainer in hose baskets.
Open petcock valve (8) and drain water from water pump (2).
Store and secure water pump (2) in transport position.
Disconnect and drain pre-extraction bin drain hose (9) and washer drain hose (10). Store hoses in
Hot exhaust ducts. Allow ducts to cool before disconnecting. Failure to do so will
Disconnect and store generator exhaust ducts (11) in hose baskets.
Disconnect dryer lint duct (12) and store inside dryer cylinder (13).
Disconnect exhaust duct (14) from dryer. Store and secure duct on trailer assembly.