TM 10-3510-209-24
2-22. WASHER DRIVEBELT (CONT)
ADJUSTMENT (Cont)
NOTE
Drivebelt deflection is done by hand
and is measured midway between the
motor pulley and the gear drive
pulley.
7.
Adjust
tension
until
the
drivebelt
can
be
deflected 1 inch (2.54 cm) from center, or until the
drivebelt ceases to slip when the motor starts running.
8.
Tighten two locking nuts (6).
9.
Tighten two pivot bolts (9A) (front and rear).
10.
Install drivebelt cover (1) on mounting brackets
(2).
2-86 Change 1