2-37.1. WATER MANIFOLD ASSEMBLY
This task covers:
General Safety Instructions
General mechanic's tool set,
High voltage is present on this equipment. Do not perform
maintenance with power on. Death or serious injury
MOS 63J (1)
TM 10-3510-209-10, Water heater off and cooled.
Repair parts as required
Antiseizing tape (teflon)
(Item 23, App C)
Thread sealing compound
(Item 5, App C)
Inspect fittings, connections and valve assemblies for leaks
Check for proper valve operation (valve opens as required; valve fittings not loose).
Tag air lines and disconnect from two hose fittings (13) located on the two air actuated ball valve assemblies (1
Disconnect washer water intake hose.
Disconnect short water hose from manifold assembly and water heater tee and remove.
Remove four nuts (37), four lockwashers (38) and two lower clamps (36).
Disconnect coupling (11) on top of manifold assembly. Remove manifold assembly with two upper clamps (35)
from water heater.
Change 1 2-134.1