2-41. DRYER ASSEMBLY (CONT)
Pressurized fuel is released when valve
is opened. Personal injury can result if
adequate precautions are not taken.
Wear protective eyewear and keep
open flame and sparks away.
Close fuel shutoff valve (55).
Open fuel drain valve (56) on fuel pump (57)
and relieve pressure. Close the valve.
Disconnect two fuel lines (58) from nipples
Loosen two screws (60) and remove cover
(61) from junction box (62).
installation of wires on the replacement
solenoid is exactly duplicated.
The solenoid is solid state. The wires
are already installed.
Tag and disconnect two wires (63) coming
from junction box (62).
Remove two mounting screws (64).
Remove solenoid (65), with attached
parts, and conduit (67) from bracket (66).
Remove two elbows (68), with attached
parts, from solenoid (65).
Remove conduit (67) from new solenoid (65) and wires (63).
Install two elbows (68), with attached parts, on solenoid (65).