2-50. WATER PUMP AND MOTOR ASSEMBLY (CONT)
Remove half coupling (16) and nipple (18)
from tee (22).
Remove plug (19), gasket (20), half
coupling (21), tee (22), and nipple (23)
from pump (10).
Use thread sealer compound (Item 5,
App C) when joining pipes and
Install plug (19), gasket (20), half coupling
(21), tee (22), and nipple (23) in pump
Install nipple (18) and half coupling (16) in
Repair electrical plug, limit switch receptacles,
and limit switch by removing and replacing them.
Remove the receptacle and limit switch as
Be careful not to damage gasket (26).
Remove six screws (24), switch box cover (25), and gasket (26) from switch box (27). Gasket will remain
with cover or box until wires have been disconnected.
2-178 Change 2