TM 10-3510-209-24
3-12. CONTROLLER STAND
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General Safety Instructions
General mechanic's tool set
SC 5180-90
WARNING
Personnel Required
High voltage is present on this equipment.
Do not perform maintenance with power on.
MOS 63J (1)
Death or serious injury may result.
Equipment Conditions:
Materials/Parts
TM 10-3510-209-10, Tarp assembly removed.
Paragraph 2-27, Pre-extraction bin removed.
General hardware (as required)
Paragraph 3-11, Washer controller removed.
Paragraph 2-24, Air compressor removed.
Paragraph 3-14, Power distribution panel
removed.
REMOVAL
1.
Remove six bolts (1), lockwashers (2), and fl at washers (3) from controller stand (4).
2.
Remove controller stand (4) from trailer.
INSTALLATION
1.
Install controller stand (4) on trailer.
2.
Install six bolts (1), lockwashers (2), and six flat washers (3).
3-40