TM 10-3510-209-24
3-14. POWER DISTRIBUTION PANEL (CONT)
14.
Remove four capscrews (35), flat washers (36) and locknuts (37) from panel box (5) and control stand (38).
Remove panel box.
REPLACEMENT
Replace the defective component with new or serviceable items. Remove and replace only those items necessary to
make repair. After replacing the defective component, make a visual inspection or perform an operational check. If
replacing whole panel new conduit holes may have to be put in panel. Match holes with old panel.
INSTALLATION
1.
Position panel box (5) and install four capscrews (35), flat washers (36) and locknuts (37).
3-50 Change 1