3-16. EXTRACTOR ASSEMBLY (CONT)
Remove and replace brakeshoe.
High voltage is present on this
maintenance with power on. Death
or serious injury may result.
Place extractor circuit breaker on electrical
panel in OFF position.
Open extractor lid (18).
Components of the extractor are
heavy and may be awkward to
procedures, lifting devices, and/or
assistance from other personnel to
Remove extractor basket (19).
Remove two brass bolts (20), flat washers
(21), and gaskets (22). Remove capscrew
(23), lockwasher (24), and drain clamp
(25). Remove curb (26) from base (27).
Measure thinnest part of brake shoe (28)
thickness measures less than 1/8 inch