3-16. EXTRACTOR ASSEMBLY (CONT)
Components of the extractor are
heavy and may be awkward to
procedures, lifting devices, and/or
assistance from other personnel to
accordance with LO 10-3510-209-12.
Refer to REPAIR, step lm, and install
basket in extractor.
Connect extractor drain line. Refer to
Lower extractor lid to operating position.
Test extractor. Refer to TM 10-3510-209-10.
Remove and replace gyro ball cap.
High voltage is present on this
maintenance with power on. Death
or serious injury may result.
Set extractor circuit breaker on electrical
power panel to the OFF position.
Open extractor lid. Remove basket.