3-25. DRYER ELECTRIC CONTROL ASSEMBLY
This task covers:
General Safety Instructions
General mechanic's tool set
High voltage is present on this equipment.
Do not perform maintenance with power on.
MOS 63J (1)
Death or serious injury may result.
TM 10-3510-209-10, Tarp assembly and
Plastic wire ties
(Item 11, App C)
Remove thermoswitch control assembly.
High voltage is present on the equipment. Do not perform maintenance with power
on. Death or serious injury may result.
Remove electrical power from the dryer.
Remove two screws (1) and cover (2) from electrical connector box (3) on dryer blower motor (4).
Remove plastic wire ties as required.
Tag and disconnect electrical wires (5) from the terminals and connectors in electrical connector box (3).