2-23. WASHER DRIVEBELT (CONT)
Drivebelt deflection is done by hand
a n d i s m e a s u r e d m i d w a y b e t w e en
the motor puller and the gear drive
6. Adjust tension until the drivebelt can
be deflected 1 inch (2.54 cm) from
center, or until the drivebelt ceases to
slip when the motor starts running.
7. Tighten four nuts (6).
8. Install drivebelt cover (1) on mounting
brackets using quarter-turn studs (2). Turn
studs one quarter turn clockwise.