DRYER TUMBLER ASSEMBLY
This task covers:
b . T e st
d . Repair
General mechanics tool kit
TM 10-3510-220-10, Tarp assembly removed.
Dryer cooled down after use.
General Safety Instructions
W A R N I NG
Dryer assembly 6-1-9236 (81337)
High temperature exhaust is dangerous during dryer
(Item 12, App C)
operation. Allow dryer to cool after use before
Fuel is toxic and flammable. Spilled fuel is a fire
hazard and eye irritant. Wipe up spilled fuel to avoid
injury and fire.
High voltage is present on this equipment. Do not
perform maintenance with power on. Death or
serious injury may result.
High temperature exhaust is
dangerous during dryer operation.
Allow dryer to cool after use before
Clean lint from dryer.
a. Remove lint door (1).
b. Remove accumulation of lint
from inside unit.
c. Install lint door (1).
d. Wipe the outside surface of
unit with a damp cloth.
Test operate tumbler dryer. (Refer
to TM 10-3510-220-10 for operation.)
Operate dryer; and after 5 minutes of operation, check temperature gage (2) for an indication of
between 130 and 250oF (54 and 121°C).
Check fuel pressure gage (3) for an indication of approximately 100 psi (690 kPa).