Direct Support Troubleshooting (Continued)
TEST OR INSPECTION
WASHER CYLINDER ROTATES, BUT AUTOMATIC FUNCTIONS DO NOT
Step 1. Check for power on #3 switch in program timer.
Adjust or replace switch.
If switch is functional, but not getting power, proceed to next step.
Step 2. Check functioning of auto/manual switch.
If switch is serviceable proceed to next step.
Step 3. Replace ICR4 relay with known good relay.
If problem persists, notify your supervisor.
6. WASHER ROTATES IN ONE DIRECTION ONLY WITHOUT STOPPING.
Step 1. Check that the reversing timer motor is turning.
a. Replace timer motor.
b. If motor is turning proceed to next step.
Step 2. Check operation of reversing timer switches.
Adjust or replace switches.
If switches are serviceable, proceed to next step.
Step 3. Check functioning of reversing contactor.
a. Repair or replace reversing contactor.
b. If problem persists, notify your supervisor.