TM 10-3510-220-24
3-10. WASHER ASSEMBLY (CONT)
DISASSEMBLY
4.
Remove door.
a.
b.
c.
d.
e.
f.
g.
Loosen set screw (50) in set collar (51) on hinge pin (52) of door and remove set collar (51).
Slip hinge pin (52) out of hinge (55) and remove door (56).
Remove four hex head cap screws (53) and washers (54) holding hinge (55) to machine
front.
Remove screw (58) and nut (57) and remove drawband (59).
Remove door gasket (60).
Remove 18 acorn nuts (61) and 36 washers (62) holding door glass retaining ring (63) and
remove retaining ring (63).
Lift out door glass (65) and gaskets (64) and (66).
3-21