3-15. EXTRACTOR ASSEMBLY (CONT)
Components of the extractor are heavy and
may be awk ward to handle. Use correct
lifting procedures, lifting devices, and/or
assistance from other personnel to avoid
Lubricate gyro ball (52) in accordance
with LO 10-3510-220-12.
Refer to REPAIR, step lm, and
install basket in extractor.
Connect extractor drain line. Refer
to TM 10-3510-220-10.
Lower extractor lid to operating
Test extractor. Refer to
Remove and replace gyro ball cap (51).
High voltage is present on this equipment.
Do not perform maintenance with power
on. Death or serious injury may result.
Set extractor circuit breaker on
electrical power panel to the OFF
Open extractor lid. Remove basket.