3-18. WATER HEATER ASSEMBLY (CONT)
10. Remove eight capscrews (14),
lockwashers (15), flat washers (16), and
four brackets (17).
Components of the water heater are hea
and may be awkward to handle. Use
correct lifting procedures, lifting device
and/or assistance from other personnel
Remove water heater (13) from trailer.
Components of the water heater are heavy
and may be awk ward to handle. Use
correct lifting devices, and/or assistance
from other personnel to avoid injury.
Install water heater (13) on trailer bed.
Line up holes of heater skid with
threaded holes in trailer.
Install eight capscrews (14), lockwashers (15), flat washers (16), and four brackets (17).
Install conduit nut (7), conduit and wires (9) in control box (10).
Connect five wires (9), and remove tags. See Appendix E.
Install limit switch (12) in control box (10) and secure with two screws (11).
Install new wire ties as needed and bundle wires neatly in circuit box (10).
Close and latch cover on circuit box (10).
Remove tags and connect airlines (3) and (5) to two air actuated ball valve assemblies (2) and
Position water hose in place and connect half couplings (1) and (6).
Perform follow-on installation
Install tarp assembly (TM 10-3510-220-10).