3-23. DRYER TUMBLER ASSEMBLY
This task covers:
TM 10-3510-220-10, Tarp assembly removed.
General mechanics tool kit
Paragraph 2-15, Left beam removed.
TM 10-3510-220-10, Platform removed.
General Safety Instructions
Plastic wire ties,
(Item 11, App C)
High voltage is present on this equipment. Do
not perform maintenance with power on.
Death or serious injury may result.
Dryer tumbler is heavy and maybe awkward
to handle. Use correct lifting procedures,
lifting devices, andlor assistance from other
personnel to avoid injury.
High voltage is present on the equipment.
Do not perform maintenance with power
on. Death or serious injury may result.
Remove three thumb screws (1) and open
control panel door (2).
Remove three screws (3), lockwashers (4),
flatwashers (5) and cover plate (4).
Loosen screws (9) on terminal board (8).
Tag and disconnect four incoming wires
(7) from terminal board.
Remove nut (11), washer (10)
and remove ground wire (12).
Cut and remove plastic wire ties as required.