WASHING/DRYING SYSTEM TROUBLESHOOTING --
LAUNDRY NOT CLEAN
Repeat laundry cycle the observe laundry.
Is laundry load clean?
YES Return to normal operation.
NO Go to step 2.
Check water temperature used versus washing instructions for laundry load.
Was correct water temperature used?
YES Check for blockage in detergent tube at connection to water manifold.
NO Repeat laundry cycle with proper water temperature.
R1 or WASH TANK NOT FILLING
Determine if problem occurred during initial filling or during normal operation.
Did problem occur during initial filling?
YES Go to step 2.
NO Go to step 9.
Check water supply.
Is water supply adequate?
YES Go to step 3.
NO Replenish water supply. Return to normal operation.
Check hose connections at water supply, water supply pump, and LADS.
Are hoses properly connected?
YES Go to step 4.
NO Properly connect hoses. Return to normal operation.
Check electrical cable connection at water supply pump and LADS.
Is electrical cable properly connected?
YES Go to step 5.
NO Properly connect cable. Return to normal operation.
Check rotation and proper priming of water supply pump.
Is pump running properly?
YES Go to step 6.
NO Install an operational water supply pump.
Check petcock on water supply pump.
Is petcock open?
YES Close petcock. Return to normal operation.
NO Go to step 7.