TM 10--3510--221--24
0143 00--2
FRONT--TO--BACK VIBRATION ELIMINATOR
REPLACEMENT -- Continued
0143 00
6
1
98
10
16
13
12
11
3
2
7
1
15
14
17
5
4
INSTALLATION
1. Position new vibration eliminator (16) onto pedestal (17), then secure with two screws (12), flat washers (13),
lock washers (14), and nuts (15).
NOTE
Step 2 applies only to rear vibration eliminator.
2. Mate stop bracket (10) to bearing support (11), then secure with two screws (7), lock washers (8), and nuts (9).
3. Open manual valve (4).
4. Close access door (3) and secure by engaging two latches (2).
5. Perform a test laundry cycle (TM 10--3510--221--10). Verify smooth operation of drum.
END OF WORK PACKAGE