TM 10--3510--221--24
0149 00--3/4 blank
STEAM EDUCTOR REPLACEMENT --
Continued
0149 00
INSTALLATION
1. Apply pipe thread sealant to threads of unions (4) and (5), new steam eductor (10), barb fitting (8), and piping
(3) and (6).
2. Thread union (5) onto steam eductor (10).
3. Thread steam eductor (10) onto pipe nipple (16) and tightne to position shown.
4. Install clamp (14) onto steam eductor (10) and mounting bracket (15), then secure with screw (11), flat washers
(12), and nut (13).
5. Thread elbow (9) onto steam eductor (10) and tighten to position shown.
6. Thread barb fitting (8) onto elbow (9).
7. Connect steam hose (7) then tighten clamp (6).
8. Connect piping (3) at unions (4) and (5).
9. Perform a HEAT WATER operation (TM 10--3510--221--10). While water is heating visually check for
steam/water leaks.
END OF WORK PACKAGE