TM 10--3510--221--24
0160 00--1
STILL CONDENSER FAN BLADE REPLACEMENT
0160 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Washer, Lock (Item 29, WP 0275 00)
Tools and Special Tools
Equipment Conditions
Tool Kit, General Mechanics (Item 1, WP 0272 00)
LADS power shut off at main control
Puller, Bearing (Item 4, WP 0272 00)
enclosure (WP 0112 00).
REMOVAL
1. Remove five screws (1) then remove cooling air shroud (2) from still condenser frame (3).
2. Remove four screws (4) and lock washers (5), then remove blade guard (6) from fan shroud (7).
3. Measure and record distance from top surface of top of motor shaft (8) to collar (9).
4. Loosen two setscrews (10), then remove fan blade (11) from motor shaft (8) using a bearing puller.
5. Remove machine key (12) from motor shaft (8).