TM 10--3510--221--24
0193 00--3/4 blank
BLOWER CONTACTOR REPLACEMENT -- Continued
0193 00
INSTALLATION
1. Pull out on locking tab (15), then install new contactor (12) onto mounting rail (16).
2. Insert overload relay (13) into contactor (12), then secure by tightening three screw terminals (14).
3. Connect wires to contactor (12) and overload relay (13) as tagged.
4. Close door (10) and secure to heater enclosure (11) by tightening four latches (9).
5. Use maintenance menu to test heating system (WP 0010 00).
END OF WORK PACKAGE