TM 10--3510--221--24
0205 00--2
PRODUCT PRESSURE REGULATOR
REPLACEMENT -- Continued
0205 00
3
4
1115181912
17
16
14
20
21
8
10
9
13
5
6
7
INSTALLATION
1. Apply anti--seizing tape to threads of nipple (13), hex bushings (15, 16, and 17), and new pressure gage (18).
2. Using direction arrow (19) for orientation, thread hex bushing (15) into inlet of new pressure regulator (12).
3. Thread pressure gage (18) into pressure regulator (12).
4. Thread hex bushing (17) into pressure regulator (12).
5. Thread hex bushing (16) into pressure regulator (12).
6. Thread nipple (13) into elbow (14).
7. Connect union (11) ensuring that pressure regulator (12) is properly oriented before tightening.
8. Connect tubes (8 and 9) to tee (10).
9. Connect electrical connector (6) to pressure sensor (7), then secure by tightening screw (5).