TM 10--3510--221--24
0241 00--2
LAMP SOCKET REPLACEMENT -- Continued
0241 00
INSTALLATION
1. Install lamp (8) and lens (7) into new lamp socket (4).
2. Remove nut (5) and lock washer (6) from lamp socket (4).
3. Install lamp socket (4) onto door (2) then secure with nut (5) and lock washer (6).
4. Connect wires to lamp socket (4) as tagged.
5. Close door (2) and secure to operator panel (3) by tightening six latches (1).
6. Position MAIN DISCONNECT switch (WP 0009 00, Figure 1, 1) to ON.
7. Position CONTROL POWER switch (3) to ON.
8. Verify POWER lamp (WP 0009 00, Figure 2, 1) is on.
9. Use maintenance menu control outputs function (WP 0010 00) to turn on SYSTEM OPERATIONAL lamp (2).
Verify lamp turns on.
10. Use maintenance menu control outputs function to turn on ATTENTION REQUIRED lamp (3). Verify lamp turns
on.
END OF WORK PACKAGE