TM 10--3510--221--24
0242 00--2
PUSHBUTTON SWITCH REPLACEMENT --
Continued
0242 00
INSTALLATION
1. Remove nut (5) and lock washer (6) from new pushbutton switch (4).
2. Install pushbutton switch (4) onto door (2) then secure with nut (5) and lock washer (6).
3. Connect wires to pushbutton switch (4) as tagged.
4. Close door (2) and secure to operator panel (3) by tightening six latches (1).
5. Use maintenance menu control outputs function (WP 0010 00) to turn on alarm (WP 0009 00, Figure 2, 5).
6. Press SILENCE ALARM switch (5). Verify alarm is silenced.
7. Move through maintenance menu until operation of all MENU SELECTION switches (7--10) is verified.
END OF WORK PACKAGE