TM 10-3510-222-10
Table 3-1. Troubleshooting - continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
9.
WASHER FAILS TO START IN MANUAL - continued.
Step 4.
Check DRAIN switch position on washer control panel.
a.
et MASTER switch to OFF.
b.
et DRAIN switch to CLOSED.
c.
et MASTER switch to ON.
d.
f washer fails to start in manual set MASTER switch to OFF and notify unit maintenance.
10.
WASHER FAILS TO FILL WITH WATER IN AUTOMATIC.
Step 1.
Check to see if nonmetallic hose between washer and water heater is connected.
a.
Set MASTER switch to OFF.
b.
Connect nonmetallic hose between washer and water heater.
c.
Set MASTER switch to ON.
Step 2.
Check nonmetallic hose between washer and water heater for clogged condition.
a.
Set MASTER switch to OFF.
b.
Disconnect nonmetallic hose.
c.
Inspect nonmetallic hose for clogged condition.
d.
Connect nonmetallic hose.
e.
Set MASTER switch to ON.
3-10