2-9. OPERATING PROCEDURES - continued.
Automatic Washing - continued.
When installing washer formula card, install from right side and always remove from left side of
cycle timer. Do not remove washer formula card from right side or it could damage washer
formula card or cycle timer.
With RUN/STOP motor switch (13, Figure 2-23) on STOI', insert washer formula card (12) into cycle timer
from the right side. Line up with start marker (11) and washer formula card cutout. Turn RUN/STOIP knob
(13) to RUN.
When washing camouflage clothing, use warm water and mild detergent. Do not use chlorine
bleach or starch on camouflage clothing.
After adding powder to soap dispenser, add water to keep finger guard from being clogged.
Every time you add supplies through soap dispenser, close cover after adding supplies. If cover
is not closed, hot air will be vented causing water in washer to cool down.
Add proper amount of washing supplies through soap dispenser (1) and add water.
Set AUTO/MANUAL switch (14) to AUTO.
Set MASTER switch (2) to ON. Washer will start and run the washer fo rmula card selected.
When audible signal sounds, push SIGNAL CANCEL to stop. If SIGNAL CANCEL is not pushed,
audible signal will sound for 20 seconds and then stop.
When SUPPLIES light (16) and audible SIGNAL (9) activate, add supplies called for in washer formula into
At end of wash cycle, ON light will shut off.
Turn AUTO/MANUAL (14) switch to OFF.
(18) Press door unlock switch (17), rotate handle and open door.
Transfer laundry to wet wash bin.