TM 10-3510-222-24
3-22. WASHER - continued.
(10)
Position top cover (36) on washer control panel (37) and install twelve washers (30) and screws (29).
(11)
Connect three air hoses (19) on washer control panel (37).
(12)
Install air hoses (2 and 3) on washer control panel (37).
(13)
Apply antiseize compound to male threads of elbow (18) and install on washer (1).
(14)
Apply antiseize compound to male threads of coupling half (17) and install in elbow (18).
(15)
Connect quick disconnect coupling (16) to coupling half (17).
(16)
Position belt guard (15) on washer (1) and install four mounting studs (14).
(17)
Apply antiseize compound to male threads of quick coupling half (6) and install in elbow (7).
(18)
Install quick disconnect cap (5) on quick coupling half (6).
(19)
Route-air hoses (2 and 3) behind washer (1) and use tie down straps as required to support hoses (2 and 3).
(20)
Connect air hose (2) to normal open valve (8).
(21)
Connect air hose (3) to normal close valve (4).
(22)
Install front frame (Para 2-18).
(23)
Install wet wash bin (Para 2-36).
(24)
Install washer drain (upper and lower) and lower washer hookup (Para 3-21).
3-35