3-51. OVERVOLTAGE ABSORBER.
This task covers:
General Mechanics Tool Kit (App B, Item 1)
Tags (App D, Item 4)
Laundry Unit shut down (TM 10-3510-222-10)
Cover removed (Para 3-42)
General Safety Instructions
Voltage in this equipment is high enough to cause
serious injury or death. Do not perform this task
with power on.
Tag and disconnect wires from overvoltage absorber (3).
Remove two screws (1) and lockwashers (2).
Remove overvoltage absorber (3) from control panel (4).
(1) Position overvoltage absorber (3) on control panel (4) and install two screws (1) and lockwashers (2).
Wire numbers are stamped on each electrical wire.
This information, in conjunction with data on FO-3,
Extractor Wiring Diagram, may be used to connect
wires if tags are lost or illegible.
Connect wires as tagged.
Install cover (Para 3-42).