3-68. TUMBLER MOTOR CONTROL RELAY (K2).
This task covers:
General Mechanics Tool Kit (App B, Item 1)
Tags (App D, Item 4)
Laundry Unit shut down (TM 10-3510-222-10)
Shield removed (Para 2-71)
General Safety Instructions
Voltage in this equipment is high enough
to cause serious injury or death. Do not
perform this task with power on.
Tag and disconnect wires from relay (3).
Remove two screws (1), lockwashers (2) and relay (3)
Position relay (3) on dryer and secure with two screws (1) and lockwashers (2).
Wire numbers are stamped on each electrical wire. This information, in conjunction with data on
FO-4 Dryer Wiring Diagram, may be used to connect wires if tags are lost or illegible.
Connect wires as tagged.
Install shield (Para 2-71).