Section V. UNIT TROUBLESHOOTING
This section contains troubleshooting information for the Laundry Unit at Unit Maintenance level. Each malfunction for
an individual component, unit, or system is followed by a list of tests or inspections which will help you determine
corrective action to take. You should perform the test/inspection and corrective actions in the order listed.
The Malfunction Index lists the common malfunctions which you may find during maintenance of the Laundry Unit or its
components. Perform these tests inspections and corrective action in the order they appear in the table. This manual
cannot list all possible malfunctions that may occur, nor all tests or inspections and corrective actions. If a malfunction is
not listed (except where malfunction and cause are obvious) or is not corrected by listed corrective actions, notify Direct
Malfunction Index. For quick access to troubleshooting procedures.
Generator. Refer to TM 5-6115-585-12 for troubleshooting.
Trailer. Refer to TM 9-2330-376-14&P for troubleshooting.
Water Heater. Refer to TM 10-4520-259-13&P for troubleshooting.
Be sure to read all Warnings in front of manual before
troubleshooting. Before you use the troubleshooting
tables, be sure you have performed all applicable operating
checks and verified that a malfunction exists. When a
corrective action is performed, verify that the action has
corrected the malfunction. All malfunctions deferred to the
next higher level of maintenance must be reported
according to the instructions given in DA PAM 738-750.