2-19. REAR FRAME.
This task covers:
General Mechanics Tool Kit (App B, Item 1)
Right beam removed (Para 2-15)
Automotive Vehicle Shop Equipment
Center beam per removed (Para 2-16)
(App B, Item 2)
Platform anchor removed if required (Para 2-20)
Blind Hand Riveter (App B, Item 7)
Rear frame is heavy and may be awkward to handle.
Blind rivet nut (App C, Item 20)
Use correct lifting procedures to avoid injury to
Two (for removal and installation)
Remove nut (6), lockwasher (7) and bolt (11) from tarpaulin frame support (3) and Laundry Unit.
Support rear frame (1) and remove eight nuts (8), twelve lockwashers (9), flat washers (10) and
Remove rear frame (1) from Laundry Unit.
If required, remove tarpaulin frame support (3) from curb or street side or both. Remove nut
(14), lockwasher (13), spacer (2) and bolt (4) from rear frame (1) and tarpaulin frame support (3).
Shims may be used to achieve 90° between rear frame and trailer if needed.
Blind rivet nut(s) (5).
Remove blind rivet nut (5) using .50 drill bit.
Insert blind rivet nut (5) in hole of rear frame.
Set blind rivet nut (5) in place.