TM 10-3510-223-13&P 0016 00
To replace a twist-lock receptacle (1) located in the ceiling or curbside raceway, or a GFCI receptacle (2)
located in the ceiling or roadside raceway, remove the cover (3). Remove mounting frame (4) from
raceway and retain installation clips (5). Loosen and remove the wires (6) from switch, noting the method
of attachment. Discard switch.
To install a new twist-lock receptacle (1), or a GFCI receptacle (2), place the new switch into the frame
(4). Attach the wires (6) onto the new switch in the same manner as removed. Place the installation clips
(5) onto the raceway and secure frame and clips onto the raceway. Place cover (3) over switch and
secure both onto the frame with screws as shown.
END OF WORK PACKAGE