TM 10-3510-223-13&P
0031 00
0031 00-5
Install Ground Post.
Place a new ground post (1) into position on the power entry box (2). Re-install the hex nuts (3), flat
washers (4), lock washers (5), and ground wires (6) onto the ground post in the same sequence as
removed. Install the rear cover of the power entry box (2).
Install Sleeves.
Place the new sleeve (1) and gasket (2) into position on the power entry panel (3). Install the pan head
screws (4) flat washers (5) and self-locking nuts (6) in the same sequence as removed. Install a new, or a
retained dust cover (7) as applicable.
1
2
6
3
3
3
4
4
5
5
6
3
2
1
7
4