TM 10-3510-223-13&P 0005 00
INSTALL EXHAUST FAN
This procedure requires four personnel to lift and move the fan into
position atop the container. Personnel in the 5th percentile size group
may require a step aide during this procedure.
Inside the container, remove captive tiedown knobs (1) securing roof panel (2). (Switch interior lights ON
with LIGHTS switch on the roadside raceway, if necessary).
Using the folding steps located on the outside of the rear end roadside wall of the container, have two
personnel gain access to the top of the container.
From top of container, remove the panel (2). Pass panel to personnel on ground. Store panel inside
container, behind washer/dryers.
Using two personnel on the ground, lift the fan to the two personnel on top of container. Remove the
adhesive tape holding the power cord to the fan housing.
Install exhaust fan onto the mount (3), so that the power cord will be on the curbside of the mount, and
align the holes (4). From inside the container, install captive tiedown knobs (1) onto exhaust fan frame
(5). Tighten captive tiedown knobs (1) securely. Plug power cord (6) into designated 208VAC raceway