TM 10-3510-223-13&P 0005 00
PREPARE DRYERS AND DRYING SYSTEM FOR USE
Remove tie-down strap from dryers (1) and place strap into footlocker after set up is complete.
Open doors on dryers and ensure lint traps (2) are clean and in place.
Through container curbside doors, gain access to area behind dryers and ensure exhaust hoses (3) are
connected to dryer outlets (4) and exhaust vents (5) in the curbside wall.
If necessary, install exhaust hoses (3) using hose clamps to secure them to dryer outlets (4) and exhaust
vents (5) in the curbside wall.
Remove vent caps (6) from exhaust vents and store them in the footlocker.
If CSSL will be placed in operation immediately after set up, leave curbside doors open. Otherwise, close
container curbside doors.
Do not operate dryers without exhaust hoses installed, or with ripped or
torn hoses. This will damage the equipment and represent a fire hazard.