TM 10-3510-223-13&P 0005 00
Do not twist or turn frame components when handling.
Damage to equipment may result.
Remove roof arch assembly (1) and side arch assemblies (4) from frame sections cover assembly
Ensure all quick release pins (2) are disengaged.
Insert quick release pins towards inside of tent end assemblies.
Tent fabric may tear if inserted towards outside.
Align holes in roof arch assembly (1) with holes in ridge gusset plate (3). Insert quick release pin (2).
Move side arch assembly (4) away from roof arch assembly (1).
Connect roof arch assembly (1) and side arch assemblies (4) to form arch assembly (5).
Lay arch assembly (5) flat on the ground.