TM 10-3510-223-13&P 0005 00
The assembled TEMPER section is heavy. At least four persons are
required to move the TEMPER away from CSSL. To avoid injuries,
ensure personnel are available before attempting to lift the TEMPER
Using one soldier at each of the four corners, move the TEMPER section away from the
CSSL approximately four to six feet.
Lowering the Frame
Frame assembly hinges can pinch or crush hands and fingers.
Keep hands and fingers away from frame assembly ridges and
Avoid folding wall fabric into joints. Material may rip or tear if caught in joint.
Place two soldiers at each arch (1) on side of tent being lowered.
On command, remove quick release pins (2) holding arches erect.
Do not twist or turn frame components when handling. Damage to
equipment may occur.
Standing clear of tent section, place one hand below eave joint of arch (1) and one on the eave purlin (3).
Swing out side frame and lower side. Extra soldiers may assist in lowering frame.